Mini Lathe C2, Distance between centers 300 mm, 370 W

Mini Lathe C2, Distance between centers 300 mm, 370 W

SKU: 1831019
GTIN: 4026863310199
Category: Sieg lathe machines
Manufacturers: Sieg Machines

799,00 €

incl. 19% VAT , (Spedition)

Available immediately
Delivery time: 1 - 3 Workdays (Other countries)

Metal lathe C2/300

Metal lathe with automatic feed for threading and longitudinal turning with feed. The C2 is a metal turning machine for machining plastics, non-ferrous metals (e.g. aluminum, AL alloys, brass, copper, gold, silver and other non-ferrous metals), gray cast iron and steel.

Application and description

Lead screw lathe with low-vibration cast frame for precise, low-vibration turning of plastics, non-ferrous metals, steel and stainless steel.

The powerful DC motor with continuously variable power electronics has a wide speed range up to from 100 to 2500 rpm in 2 gear stages. Thus, both non-ferrous metals as well as steel up to stainless steel can be processed with sufficient torque.

The standard lead screw makes it possible to manufacture threads with pitches from 0.4 to 2.0 mm. The lead screw also allows automatic feed in the longitudinal direction to be selected, thus achieving an optimum work result. The scale rings allow a precise reading accuracy of 0.02 mm. Thus, fits can be produced very accurately on the machine.

An 80 mm three-jaw chuck is supplied as standard. Due to the inner and outer stepped clamping jaws included in the scope of delivery, workpieces up to approx. 76 mm can be securely clamped and processed in the three-jaw chuck.

The C2 metal lathe is ideally suited for precise turning in the fields of model making, design, jewelry design and crafts. Whether in the private sector for hobby, model making or in the commercial sector for designers to produce initial samples, demonstration samples, for designers in the field of jewelry (rings) or in the workshop for small individual part productions - for all areas you have with the C2 an inexpensive, small metal lathe that fits on any workbench due to its low dead weight and its small dimensions.

You can find further, extensive accessories around LATHEING-THRILLING-MILLING in this store.

370 W S6 50%110 mm16 mm55 mm

Technical specifications
Nominal voltage	230 Volt~ / 50 Hz
Power consumption
Tip height	90 mm
max. workpiece diameter over bed	180 mm
Workpiece diameter over cross slide
max. workpiece length/tip width	300 mm
max. machinable outer diameter	approx. 74 mm
Working spindle inner diameter	20 mm
max. cross-section turning chisel shank	8 x 8 mm
Clamping capacity three-jaw chuck 80 mm (approx. values)
Jaws outer / inner stepped	34 mm / 75 mm
Jaw chuck bore
Rotary accuracy (w. chuck)	< 0.03
Pinolenweg
speed range	stepless 100 - 2,500 min^-1
Feed rate leading spindle	0.09 mm/rev and 0.4 - 2.0 mm/rev
Morse taper work spindle/tailstock	MK 3 / MK 2
Dimensions (W x H x D)	approx. 750 x 330 x 260 mm
Shipping weight	approx. 40 kg


technical subject to change