Bench Lathe SC4
with automatic crossfeed and longitudinal feed
Bench late with 510 mm distance between centers and 105 mm swing over bed.
NEW brushless motors with 1 KW drive power! resulting in maximum torque and quiet operation in all speed ranges
The combination of brushless DC motor, advanced electronic speed controller and direct belt drive from motor to spindle, provide far better torque over a wider speed range (even at low speeds) thus enabling the elimination of the gearbox and resulting in a quieter machine. In addition, fewer wear parts are engaged, which makes the machine generally low in maintenance.
As a result, a maximum of torque and power is transmitted to the workpiece, especially in the low speed ranges. This considerably facilitates parting and tapping.
The covered lead screw makes it possible to produce threads with gradients of 0.25 to 3.0 mm. The lead screw enables to select an automatic feed in the longitudinal and in the cross direction, whereby an optimum and clean work result can be achieved.
A 100 mm three-jaw chuck is supplied as standard.
The bench lathe SC4 is ideal for the production of workpieces of metal, non-ferrous metals and plastics up to a diameter of approx. 100 mm. Also the processing of higher-strength materials, e.g. stainless steel or steel up to approx. 1000 N / mm2 tensile strength is possible without any problem.
You will find suitable accessories for this machine further down on this page.
|Nominal voltage||230 Volt~ / 50 Hz|
|Motor output power||1000 W|
|Swing over bed||105 mm|
|Workpiece diameter over bed||210 mm|
|Distance between centers||510 mm|
|max. workable outer diameter|
|Hole trough spindle|
|max. shaft diameter turning tool||10 x 10 mm|
|Capacity self-centring 3 jaw scroll chuck app 100 mm|
|Jaws internal- / external|
|Hole through chuck|
|Concentricity (with chuck)|
|Cross side travel||100 mm|
|Compound travel||70 mm|
|Range of thread metric version||0,25 - 3 mm (17 threads pitches)|
|Range of thread imperial version||8-24 TPI (10 threads pitsches)|
|Spindle speed||variable speed 100 - 2.000 min-1|
|Feeding speed lead screw||0,25 - 3,0 mm/U|
|Spindle taper / Tailstock taper||MT 3 / MT 2|
Overall dimension (LxWxH)
Packing Size (LxWxH)
910 x 360 x 400 mm
1060 x 710 x 510 mm
|Weight (Net/Gross)||105/135 kg|
Scope of delivery:
100mm three jaw chuck
- External jaws
- Internal jaws
- Key for chuck
- Change gear set (metric)
- MT2 center
- Wrench set
|Shipping weight:||135,00 Kg|
|Product weight:||105,00 Kg|