Engine lathe with automatic feed for thread cutting and longitudinal turning with feed. The C2 is a metal working lathe to process materials like plastics, non-ferrous metals (e.g., aluminum, AL alloys, brass, copper, gold, silver and other non-ferrous metals), gray cast iron and steel.
Scope of application and description
Lead screw turning machine with low-vibration iron cast frame for precise, low-vibration turning of plastics, non-ferrous metals, steel and stainless steel.
The powerful DC motor with infinitely variable power electronics has a wide speed range from 100 to 2500 rpm in 2 gear stages. This allows both non-ferrous metals as well as steel up to the stainless steel to be machined with sufficient torque.
The standard lead screw allows to produce threads with pitches of 0.4 to 2.0 mm. The lead screw enables to select an automatic feed in the longitudinal direction, whereby an optimum work result can be achieved. The scale rings allow a precise reading accuracy of 0.02 mm. Thus, fits can be produced very accurately on the machine.
A 80 mm three-jaw chuck is supplied as standard. Thanks to the included internal and erternal jaws, workpieces can be safely clamped and machined up to diameter of approx. 76 mm.
The C2 metal working lathe is ideal for precise turning in the areas of model making, design, jewelery design and craftsmanship. Whether in the private sector for hobby, model building or in the commercial sector for designers for making initial patterns, visual patterns, for designers in the area of ??jewelry (rings) or in the workshop for small individual parts - the C2 is a cost-effective, small metal turning machine, which fits on every workbench due to its low weight and small dimensions.You will find suitable accessories for this machine further down on this page.
|Nominal voltage||230 Volt~ / 50 Hz|
|Power consumption||370 W S6 50%|
|Swing over bed||90 mm|
over cross slide
|Distance between centers||300 mm|
|max. workable outer diameter||ca. 74 mm|
|Hile trough spindle||20 mm|
|max. shaft diameter turning tool||8 x 8 mm|
|Capacity self-centring 3 jaw scroll chuck|
app. 80 mm
|Jaws internal- / external||34 mm / 75 mm|
|Hole through chuck||16 mm|
|concentricity (with chuck)||< 0,03|
|Sleeve travel||55 mm|
|Spindle speed||variable speed 100 - 2.500 min-1|
|Feeding speed lead screw||0,09 mm/U sowie 0,4 - 2,0 mm/U|
|Spindle taper / Tailstock taper||MT 3 / MT 2|
|Overall dimension (L x W x H)||ca. 750 x 330 x 260 mm|
|Weight (Net/Gross)||ca. 37 / 40 kg|
|Technical changes reserved|
Scope of delivery:
- 80mm three jaw chuck
- External jaws
- Internal jaws
- Key for chuck
- Change gear set (metric)
- MT2 center
- Wrench set
|Shipping weight:||40,00 Kg|
|Product weight:||37,00 Kg|